Contact Us

Please calculate 8 plus 1.

AccuMind®

Universal flow and heat quantity computer with capacitive touch display and various interfaces

Description

Even though many flow and heat quantity calculations are now carried out in control systems, compact flow computers still play an important role. This applies if either no suitable control system is available or the required calculation algorithms are not economically feasible to program in the existing control system.

When selecting a suitable flow computer, the user often faces the problem that the required calculation is not available at all or that a suitable device must be selected from a large number of hardware and software variants with different operating philosophies. Costly and time consuming mistakes are inevitable.

The AccuMind® offers numerous calculation algorithms in one device with a uniform operating philosophy and is easy to program. First select the desired application. Depending on the application, only those values are entered in the parameterization menu which are necessary for the device to function correctly. At the end, the user can program the display according to his needs.

Do you prefer a plug-and-play solution? Then simply order the device parameterized.

The AccuMind® has a modern touch display, various bus interfaces, an Ethernet interface and is prepared for the future requirements of industry 4.0. Due to the digital interfaces to the flow sensors, it is not only possible to access the AccuMind® via PC or tablet but also directly to the field device.

The AccuMind® offers practical advantages wherever

  • Flow calculation shall be done based on complex algorithms such as AGA-8, SGERG-88, AGA-NX 19, ISO 20765-1, AGA-3, AGA-5, AGA-7, AGA-10 or AGA-11,
  • Linearity errors of DP flow instruments shall be corrected in real time to improve accuracy,
  • Bidirectional flow measurement is required,
  • Individual calibration curves need to be stored and used,
  • Ease of operation is desired,
  • Display options selection shall be flexible,
  • Modern interfaces are required.

Applications

Further information

Product brochure

EN | DE

Installation and operation manual V1.00 / QAL

EN | DE

Installation and operation manual from V2.00

EN | DE

Our WebApps

The following WebApps offer helpful calculations for selecting and sizing our differential pressure sensors.

Technical specification

Calculation algorithms
 
Water and steam: IAPWS-97
Technical gases; Ideal gas law, various real gas equiations, natural gas algorithms
Heat carrier oils: Parameterization based on individual properties
Other fluids: Constant characteristics
Flow meter technology: Special calculation algorithms for differential pressure instruments, ultrasonic instruments, volumetric instruments and mass flow sensors
Input signals:
 
Flow: 2 × 0/4 … 20 mA with FSK-Modem for HART-devices
2 × Frequency Input
Temperature: 2 × Pt100, 2 × 0/4 … 20 mA
Absolute Pressure: 1 × 0/4 … 20 mA
Output Signals 2 × 0/4 … 20 mA
1 × mechanical relays
2 × electronic relays
Fieldbus Interfaces: Modbus RTU and TCP
M-Bus
Profibus, Profinet upon request
User Interface: TFT Color display with capacitive touchscreen
Copyright 2024 S.K.I. GmbH. All Rights Reserved.